Facility Management

 

Lindo Rep. Strong Key Benefits

It is used as antistatic and water-repellent non-film-forming treatment, suitable for upright glass surfaces on which a barrier effect to the powder is required without modifying the surface and the final aesthetic appearance. It can be used on any kind of surface:

  • External Glass protection against dirt (any kind)
  • Car body (metals)
  • Leather
  • Plastic
  • etc...

 

 

 

Thermo Glass Key Benefits:

Properties:

  • Significant Optical Performances
  • Great physical-chemical performances
  • Easy application by spray gun, tape and recycle tools.
  • To be applied from inside.
  • Easy cleaning: thanks to its anti-electrostatic feature, it reduces pollution of electromagnetic wave and dust adhesion.
  • It can be easily cleaned only by using a microfiber cleaning towel either dry or wet soaked with standard glass cleaners,
  • AS LONG AS THEY DO NOT CONTAIN AMONIACA.
  • High transparency: high visible light transmittance, it does not need extra lighting.

 
 
Advantages:

  • More energy saving isolation performance of glass increases appreciably and it allows to save 30-40 % of energy.
  • UV and Infrared filter: thanks to UV and Infrared filtration, the energy saving increases significantly and the discoloring process caused by the sun is minimized.
  • Environmentally friendly: water-based solution and low V.O.C content.
  • Economic solution: much cheaper than other energy saving glass, glass film.
  • No need to replace the existing glass.
  • Service life: 10 years

 

ECTOR

V50 Internal Glass protection Key Benefits:

ECTOR® Glass and Cristal V50 is suitable for most glass and crystal surfaces, also soundproof glass, tempered glass, insulated glass, for solar panel and greenhouses.

CHARACTERISTIC OF THE TREATMENT ECTOR® Glass and Cristal V50 does not change the appearance of the surface, it is high temperature and high pressure resistant even during steam cleaning of the glass; it is absolutely resistant to frost and it is UV light stable.

Just a little amount of product is necessary to achieve an excellent effect.

ECTOR® Glass and Cristal V50 is a long term treatment and it is resistant because the nanoparticles adhere directly to the molecules inside the substrate and cannot be removed neither by water nor by cleaning agents or high pressure equipment.

ADVANTAGES OF APPLYING ECTOR® Glass and Cristal V50 ·

  • It gives the glass excellent hydrophobic and oleo-phobic properties, making them easy to clean
  • Impressive ease of removing of dirt, dust, lime scale, grease and other contaminants.
  • It creates an efficient protection against scratches.
  • It makes glass surfaces extremely resistant to abrasion.
  • The sand will be easily removed just using Air Compressor.
  • It makes glass and crystal particularly polish and brilliant.

 

PAV A & PAV B Marble and Granite Protection Key Benefits

Features
PAV-A and-B is a revolutionary treatment for 2 components, creating a three-dimensional network at the nanometer scale, repels dirt particles in this way can not come into contact with the surface.

Benefits
Due to the hydrophobic properties of oleophobe and dirt such as grease, oil, limestone and other contaminants do not penetrate into the substrate of the surface and are then removed with ease, even without the use of abrasive media.

  • Impressive ease of cleaning
  • Even a permanent marker will be removed with ease

 

 Where to apply:

  • Flooring minerals • Marble floors
  • Granite flooring
  • Porcelain hard and shiny

 

Top
Return to Top ▲Return to Top ▲